*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)
- Download Scp-ds-driver-package-1.2.0.160
- Scp Ds3 Driver Download
- Download Scp Driver.exe
- Download Scp Driver Package
This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.
- Free sct device updater windows 10 download software at updatestar. This is typically a device driver issue that occurs when a device is plugged into your computer for the first time without downloading the Device Updater first.
- Sct Device Drivers, free sct device drivers software downloads.
To speed up this process you may download the SCT Software License Agreement here. Then print the last page, fill it out, and fax it to 407.260.6275 or email it to Keys@SCTFlash.com. A example signature page can be found here. Once SCT has received your signed license agreement they should activate your dongle. How do I install the SCT device updater software? It is suggested to always return your vehicle back to stock and check for automatic updates prior to loading new tunes on your device and flashing your vehicle.
Device Updater
OS Requirements: Windows Vista/7/8/10
*Used to download updates for GTX, BDX, X4, Livewire, ITSX
Click hereto download the Device Updater.
Make sure all devices are unplugged during the install process.
Livelink Gen-II
OS Requirements: Windows Vista/7/8/10
*Datalogging software.
Click hereto download Livelink Gen-II.
Make sure all devices are unplugged during the install process.
Advantage III
OS Requirements: Windows Vista/7/8/10
Click hereto download Advantage III.
Make sure all devices are unplugged during the install process.
Drivers
Windows 32bit drivers click here.
Windows 64bit drivers click here.
Install Instructions
If you installed the SCT device updater before you plugged the device in then this should be easy to fix.
With your device connected:
Open your computers Device Manager.
Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)
Download Scp-ds-driver-package-1.2.0.160
If you see this, right click it and select update driver.
A new window should open up and give you the option to either automatically search, or browse for files.
Click browse for files
Navigate to the folder you downloaded, and select “Open”.
Scp Ds3 Driver Download
If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.
Download Scp Driver.exe
Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.
Update Agent for GT's
Download Scp Driver Package
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
How do I update my Bully Dog GT Tuner?
Basic Steps to Update a GT Tuner
1. Run the Update Agent.
2. Connect the Micro SD card to your computer.
3. Choose the vehicle application and let the Agent search.
4. Click the Update button.
5. When the Update is finished, put the Micro SD card in the GT.
6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)
Detailed Steps to Update a GT Tuner
Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?
To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.
- Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
- Connect the SD with either the card reader or the GT itself and the USB cable
- Highlight the card in the update agent, and select “select device”
4. Select your device (40417, 40420, etc.) then select “download and upgrade”
5. Wait for the download to finish, you will see this message.
6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.
MoonLite offers both Non ASCOM Software programs and a universal ASCOM driver to operate all MoonLite focusers and controllers.
- MoonLite Stepper motor Software / operation instructions for the Mini V2 controller and DRO dual port display controller can be downloaded here: High Res Stepper Motor Combo 2015
- MoonLite Mini V2 controller Quick Guide can be downloaded here: Mini V2 Quick Guide
- MoonLite Software and Troubleshooting guide can be downloaded here: MoonLite Software download and troubleshooting guides
- MoonLite Motor hardware options can be seen here: http://focuser.com/motorfocus.php
- MoonLite Single Focuser V1.4 - Is an Non ASCOM Focuser Control Program for 'Manual' focus control using a PC. No ASCOM is required. It works with all MoonLite brand SINGLE PORT controllers such as the current Mini V2 controller, original Mini controller, and original DRO Display single port controller.
- MoonLite Dual Focuser V2.2.0.0 - Is an Non ASCOM Focuser Control Program for 'Manual' focus control of 2 focusers using a PC. No ASCOM is required. It works with MoonLite's Dual port DRO display controller only. Please note, it will not work with two single port controllers.
- MoonLite Dual Rotator V2.2.0.0 - Is an Non ASCOM Focuser Control Program for 'Manual' focus / rotator control of one focusers with both a focuser motor and rotator installed using a PC. No ASCOM is required. This software only works with MoonLite's Dual port DRO display controller.
MoonLite Stepper Motor Belt Rotator installation document can be downloaded here:
Stepper motor Belt RotatorMoonLite Stepper Motor Belt Rotator hardware installation video can be seen here:
https://www.youtube.com/watch?v=C0WYadI2IDE&feature=youtu.be - MoonLite 32/64 bit universal ASCOM driver requires ASCOM Platform 6.0 and can be downloaded here:
MoonLite DRO Setup.zip
Our one driver works with all controllers and focuser configurations, Single port, Dual port, and Rotator.TheSKYX Pro has a direct plug in for MoonLite Mini V2 controllers and Nitecrawler focusers.
See Daily Build to download. - How to configure the MoonLite ASCOM driver to run 2 separate focusers instead of a focuser with a rotator:Instructions
- Setting up your MoonLite with FocusMax Online tutorial
- All Moonlite controllers ( Mini V2, DRO Display, and NiteCrawler/ LiteCrawlers ) require a modern Uart driver to connect to the PC using the USB port. If you are using an older PC or it is not connecting, please download the lastest drivers from: http://www.ftdichip.com/Drivers/VCP.htm
- MoonLite Driver for Linux - INDI is a cross-platform system designed for automation and control of astronomical instruments. INDI drivers are available for MoonLite Focusers. INDI supports autoguiding & autofocus and runs on multiple clients such as KStars, and Sky Charts. Read more about INDI and download the latest version directly from the INDI Web Site.
NiteCrawler
NiteCrawler focusers can be operated with ASCOM, Moonlite's Utility program, and the SKYX direct plug in.
MoonLite NiteCrawler Utility Program is a Non ASCOM Focuser Control Program for operating the NiteCrawler 2 axis rotating worm drive focusers. No ASCOM is required to operate the focuser with this utility program. This program operates all 3 sizes of Nitecrawlers, WR25, WR30, and WR35 format.
NiteCrawler and LiteCrawler ASCOM driver version 6.2.6939 ( works with all 3 NiteCrawler format sizes) updated 12-31-2018
NiteCrawler non ASCOM utility program - NC_Remote_1_1_14.zip (March 2017)
TheSKYX Direct plug in. (See Daily Build on SB site) Works great !NiteCrawler Driver for Linux - INDI is a cross-platform system designed for automation and control of astronomical instruments. INDI drivers work with all 3 size Nitecrawler rotating focusers. INDI supports autoguiding & autofocus ,Rotation, and runs on multiple clients such as KStars, and Sky Charts. Read more about INDI and download the latest version directly from the INDI Web Site.Setting up your NiteCrawler with SGP1) Select the 'NiteCrawler Focuser' and 'NiteCrawler Rotator' in the corresponding areas of the SGP Sequencer Window:
2) For Auto Focus you will likely need to increase your step size considerably because of the extremely fine resolution of the NiteCrawler. (previously this setup required 50 steps and is now at 1500). A more in depth discussion for determining auto focus parameters can be found here:http://mainsequencesoftware.com/Content/SGPHelp/SequenceGeneratorPro.html?UnderstandingAutoFocus.html
3) Next test the rotation direction of your setup. Moving from 0-30 degrees should cause the rotator to move clockwise as viewed from behind. If this is not the case reverse the direction inside of the ascom driver:
Videos:For a look at the new NiteCrawler Focusers, see Video here:
https://www.youtube.com/watch?v=azcv1b6u3joFor NiteCrawler / TAK refractor installation, See Video here:
https://www.youtube.com/watch?v=q0Ftg5Sjrqk